Bring the thrill of the Wild West to the shooting range with the Cowboy Action Targets and PT Practice Stand. This stand collapses to under 3 feet, making it super easy to transport. It's built tough to handle daily cowboy action training. The PT Practice Stand offers 10 different official CAS shapes crafted from 3/8' AR500 armor steel. This steel can withstand anything from .22 to .44 Magnum and cowboy action rifle loads from as close as 10 yards. Each target has a flat shooting surface with no exposed bolts or brackets. It's angled forward to direct dangerous ricochets and splatter into the ground. You also have the option to add a 1' x 2' Target Holder. Just insert 1' x 2' wood strips into the clamps and attach paper or cardboard targets. Note: The stand is made of mild steel and can't handle bullet force. Shooting the stand may cause damage. Specifications: Height is 4', weight ranges from 50 - 60 lbs (depending on target head size), steel grade is 3/8” AR500, handgun shooting distance is 10 yards or more, and cowboy action rifle load shooting distance is also 10 yards or more. Always check the Steel Target Safety Rules before shooting on any steel target and read The Science Behind Steel Targets for more info. FAQs: The stand ships pre - assembled and collapsed, with two lock nuts, two wing nuts, and two carriage bolts. You can use wing nuts to mount the target head by hand or a 3/4' socket with lock nuts. The 'PT Practice Stand' refers to the collapsible stand, not a specific target head. You can attach most Action Target target heads as long as they're not too heavy. CAS target heads are for centerfire handguns and cowboy action loads. High - powered rifle rounds will damage them. The stand has two settings: 3' tall (high) and 2' tall (low). You can set it to the lower setting for more stability with heavier target heads.
Using the PT Practice Stand is a breeze. First, when it arrives, it's pre - assembled and collapsed. You can use the included wing nuts to mount the target head by hand, or if you prefer, use a 3/4' socket with the lock nuts. There are 10 different official CAS target shapes to choose from, and you can attach them to the stand as long as they're not too heavy. If you want to shoot on paper or cardboard targets, use the optional 1' x 2' Target Holder. Just insert 1' x 2' wood strips into the clamps and attach your target. The stand has two height settings. For heavier target heads, you can set it to the lower 2' setting by pulling the neck back 90 degrees and pushing down until it locks. Remember, the stand is made of mild steel, so don't shoot at the stand itself as it can get damaged. Before shooting on any steel target, always refer to the Steel Target Safety Rules and read about the science behind steel targets. To keep your stand in good shape, store it in a dry place when not in use. Check the bolts and nuts regularly to make sure they're tight, and clean the target heads after each use to remove any debris.
